Jump to content

Jim Roach

Members
  • Posts

    17
  • Joined

  • Last visited

Required Information

  • FirstName
    Jim
  • Make
    Monaco
  • Model
    Dynasty Diamond IV
  • Year
    2006
  • City & State
    Box Elder SD

Optional Information

  • Brief Bio (Optional)
    Fulltime since 2013, Carrilite, DRV’s and SpaceCraft, now a Monaco!

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Jim Roach's Achievements

5

Reputation

  1. I actually did. That’s where I’ve found it on other coaches. But….. not this one. The link provided by DR4Film has the old style- my style levers. Ordering 4 in the morning.
  2. 2006 Dynasty- The electric and air options on our seats work fine, but the levers that are release the cables are broken. Are they Flexsteel or ?? Not finding a make or info on them in the files. We just need the lever-flipper black plastic piece for both passenger and drivers sides. Northwestern RV parts doesn’t have anything that resembles it. Thanks for any info!
  3. I’ll dig thru the wiring bundles and find it then. I thought it was 1 deep box with multiple stacked of circuit boards in it.
  4. Mine is a 12v Koolamatic. You’ll have to find a 120 VAC source to pull from.
  5. I have the manual, I just cannot locate the sensing unit. I understand how to adjust it once found. Big box/small box? Something inside the module I attached a pic of? Shoe box size or smart phone size? I’ve dropped all the ceiling panels in all the bays and the above HWH box is all I see. There are other ECM’s, brain boxes, etc but nothing looking like the above.
  6. This is the only HWH unit I can find. It doesn’t have what the book is calling for with the 4 lights and the adjustment nut and screw. I may be looking for something bigger than it actually is though. I’m sure I have leaks, just need to figure out how to access the underneath area. Not as skinny as I used to be.
  7. Thank you all for the Great information here! New owner of a 2006 Dynasty with the 2000 series system. It almost works as it should except for the following- 1st issue- I cannot locate the sensing unit. I need to adjust the unit to bubble level- level. It’s drifted out over the years. I’ve looked on the ceilings of all the bays but cannot find it, dropped panels, I know how to adjust it, just can’t find it. 2nd issue- the system will pop off air, from 5 to 20 seconds and then the compressor will run to relevel us. This occurs several times a day. I understand the unit wakes and checks for level every 30 minutes, etc. The 6 packs have been rebuilt and don’t bubble at this time. Any suggestions? Admins- i can start a new topic if necessary. Thanks,
  8. Dug into the archives- there is a wealth of info there! Thanks Tom for pointing that direction. The Kool-A-Magic is a 12v unit. That makes swapping it easy, and eliminating another roof obstruction for solar.
  9. Doesn’t light, I’ll pull it apart and see if the wires or bulb is dead.
  10. I completely forgot about the Multiplex….. If there set at 10am loads, then even with all LED lighting, a Max Air or Fantastic that is sticking shut would draw 14-16 amps (been there/done that). If it’s a 120 VAC fan, then a quieter bathroom exhaust fan would even work. Little metal work for brackets and done.
  11. Ivan- Thats what I found- Don’t know if its original parts or a knock off but one is on its way.
  12. Would a 2006 Dynasty have the outside lighted bar? Our interior bars illuminate with a switch, when the door is opened. The outside bar does not. What’s the difference between the Essex and Trimark? Our button panel is not on the grab bar.
  13. Next repair I need to tackle is the Kitchen vent. 2006 Dynasty Diamond IV floor plan. The vent and fan are fixed mounted- not a standard vent set up. It has the aluminum rain cover on the roof and the plastic sliding cover on the inside. Ours has had a switch replacement with it being wired to pull air in…. Thats easy enough to swap the wires so it can exhaust correctly. I’m assuming this is a 110v assembly. Has anyone replaced this with a Max Air or Fantastic vent? Something that doesn’t sound like a jet engine over your head when you’re cooking? Is there 12v wiring already run in the ceiling? Could I pull a positive wire off a ceiling light and use a remote- Max Air style? Are there replacement slide covers available?
  14. Bringing this topic back up….. It sounds like my 2006 Dynasty Diamond IV is set the same as “det944”. But what he didn’t mention was what thermostat controls the basement heat? I know there is the independent rotary style thermostat under there in the Aqua-Hot compartment but what controls the blower? Or is it a one speed On/Off?
×
×
  • Create New...