Dr4Film Posted April 19, 2022 Share Posted April 19, 2022 I need to find a vendor where I can purchase a small part needed for the wiper linkage on my 2006 Dynasty that drives the wiper arms back & forth. What I need is the small Offset Arm that attaches both to the motor shaft which has a taper splined shaft and the other end attaches to what appears to be a "ball" type of joint that swivels around in a circle which I believe is also a spined taper shaft on the "ball" joint. That ball joint is attached to the long linkage that drives the wipers back and forth. I would appreciate ANY help that can be provided in pointing me to the right vendor who will have the part. Thanks SO much! Link to comment Share on other sites More sharing options...
bklaes Posted April 19, 2022 Share Posted April 19, 2022 amequipment.com helped me. Link to comment Share on other sites More sharing options...
Dr4Film Posted April 19, 2022 Author Share Posted April 19, 2022 They were the first place I called but their wiper system was only used on the very early Monaco Dynasty's, not the 2006. Thanks anyway! Link to comment Share on other sites More sharing options...
BradHend Posted April 19, 2022 Share Posted April 19, 2022 (edited) Try these guys as well, I have used them for my coach with success. Either search through their catalogue or contact them directly via email https://www.globalproducts.llc https://www.rvandmarine.com/product-category/diesel-equipment-rv-wiper-blades-motors-and-assemblies/ Edited April 19, 2022 by BradHend Link to comment Share on other sites More sharing options...
Scotty Hutto Posted April 19, 2022 Share Posted April 19, 2022 @pwhittle found a place that built a complete set for his 2005 Sig. I bet they could help. Link to comment Share on other sites More sharing options...
CorinthWest Posted April 19, 2022 Share Posted April 19, 2022 I replaced both my wiper arms, blades, and pivot hardware last year. I got my parts from Mill Supply. They were very helpful and have a LOT of pantograph wiper parts. I don't know of anyone with a better selection. They'll also send you a free catalog. 1(800) 888-5072 Good luck. Link to comment Share on other sites More sharing options...
Hypoxia Posted April 19, 2022 Share Posted April 19, 2022 1 hour ago, BradHend said: Try these guys as well, I have used them for my coach with success. Either search through their catalogue or contact them directly via email https://www.globalproducts.llc https://www.rvandmarine.com/product-category/diesel-equipment-rv-wiper-blades-motors-and-assemblies/ The 2006 Dynasty probably has Wiper Technologies, now Global Products. Does the wiper motor have a "Kit Number on it? Call Global with that number, they made it. Link to comment Share on other sites More sharing options...
allphase8 Posted April 20, 2022 Share Posted April 20, 2022 Rome Truck Parts, Rome GA They will have what ever you need. Sent me a complete parts for wiper assembly for our 2006 Camelot. Very knowledgable and helpful Link to comment Share on other sites More sharing options...
Mocephus Posted April 20, 2022 Share Posted April 20, 2022 I had my '05 Signature's complete wiper assembly built by a company called Wiper Technologies, Inc, based out of Greensboro, NC. They took my assembly and built one just like it. They were purchased by Global Products LLC in 2020. I bet they can get or make what you need. https://www.globalproducts.llc/ Hope this helps! Moe Link to comment Share on other sites More sharing options...
Warren B Posted April 20, 2022 Share Posted April 20, 2022 Rome Truck Parts was recommended on this forum a couple of years ago. 800-284-4345. I called them and provided the Monaco number on the large white sticker on the wiper motor. They sent a drawing of the entire wiper system with part numbers. Link to comment Share on other sites More sharing options...
veraken Posted April 20, 2022 Share Posted April 20, 2022 Here are a few sources https://midwestbusparts.com/ https://www.amequipment.com/ http://www.rometruckparts.com/ Link to comment Share on other sites More sharing options...
pwhittle Posted April 21, 2022 Share Posted April 21, 2022 Hi Richard, I have a complete replacement system from Wiper Tech for our 2005 Signature. When I install it, I’ll can send you the piece from the old one if you still need it. Paul Link to comment Share on other sites More sharing options...
Dr4Film Posted April 21, 2022 Author Share Posted April 21, 2022 I really appreciate everyone's response and help with finding a vendor for the wiper crank part. The second vendor I called was Rome Truck Parts and they sent me photos of the two different cranks that were used on the 2006 Monaco Dynasty's. I am waiting on a puller to get the old crank off but in the meantime, I have been saturating the area with PB Blaster so it will hopefully come off easily. 7 hours ago, pwhittle said: Hi Richard, I have a complete replacement system from Wiper Tech for our 2005 Signature. When I install it, I’ll can send you the piece from the old one if you still need it. Paul Thanks so much! I appreciate your help. Please hang onto it once you have the old system removed as I may need it later. You're the best! Link to comment Share on other sites More sharing options...
Paul J A Posted April 21, 2022 Share Posted April 21, 2022 Windshield Wiper Parts Here are a few sources. http://www.dieselequipment.com http://rometruckparts.com/ http://www.amequipment.com/ https://www.wiperparts.com https://midwestbusparts.com/index. 1 Link to comment Share on other sites More sharing options...
Dr4Film Posted April 23, 2022 Author Share Posted April 23, 2022 Followup to close out this thread, I got the crank removed with a puller that I purchased from Amazon. The two photos and description of the two cranks that Rome Truck Parts had sent to me earlier included one that matches my crank perfectly. I will place an order for the part on Monday. The cost is $11.95 plus shipping. The part number is 200188 and has a 4-0 stamped on the crank. Photos of the two cranks included. 1 Link to comment Share on other sites More sharing options...
Dr4Film Posted May 7, 2022 Author Share Posted May 7, 2022 Finally got the new crank installed yesterday and I now have good working wipers. Since I was out there working on them, I decided to remove the driver's wiper arm to install a large Stainless-Steel washer next to the fiberglass cowling where the wiper arm shaft comes through the fiberglass. The arm drive shaft was a little wiggly there plus the fiberglass was chewed up a bit from the movement. I also needed about 3 feet of new washer hose which I got at the local NAPA store for that arm. The SS washer I purchased at ACE Hardware. I put it all back together and everything is now working as I expect it to and as it should have been when I picked the coach up from Salt Lake City Utah. So much for a $950 "certified" inspection. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now